Attendant Intrusion; Day/On-Demand/Night Mode Service (Manual/Automatic) - LG KD-36D Quick Reference Manual

●
DIGITAL KEY TELEPHONE / ATTENDANT OPERATION

Attendant Intrusion

Attendant may intrude into any station which is in conversation with a CO line. Attendant may intrude into any station which is in conversation with a CO line
Button
To assign a flexible key as the Intrusion button
Press TRANS/PGM button.
●
Press the desired flex. key to be registered.
●
Press TRANS/PGM button.
●
Dial 8 6.
●
Press HOLD/SAVE button.
●
To activate attendant intrusion (GDK-186/100/34i),
Press DSS button corresponding to the busy station you wish to call.
●
(Busy tone is heard.)
Press ATD INTRUSION button.
●
(Intrusion warning tone is heard in the busy station, then a 3-way
conference is set up.)
To activate attendant intrusion (GDK-16/20W),
Press CO button you wish to converse. Press CO button you wish to converse.
●
(If intrusion is allowed by Admin program, then 3 way conversation is set
up. If intrusion is not allowed, busy tone will be heard.)
System Base Program (Main Menu 5) - System Attribute (Sub Menu 1)
●
- Privacy (Terminal Menu 2)

Day/On-demand/Night Mode Service (Manual/Automatic)

The attendant station can be placed into night service mode allowing ring assignments and
answering privileges to station not having the privileges in the day mode. Or, can be placed
into on-demand service mode allowing ring assignments and answering privileges to station not
having the privileges in the night mode.
(In GDK-16, only Day/Night mode change is available by pressing DND button at attendant station.)
Button
To activate/deactivate Day/Night/On-demand mode manually,
P Press DND/FWD button at attendant station. DND/FWD b tt
●
Then, DND/FWD button is flashing. (The system is placed into On-demand
●
mode.)
If pressing the DND button once more, then the system is placed into Night
●
service mode.
On-demand mode is not activated automatically.
●
To change Day/Night mode automatically,
Press TRANS/PGM button.
●
Dial # 9 Dial # 9.
● ●
Enter DAY TIME + NIGHT TIME, or DAY TIME + * or * + NIGHT TIME .
●
(Enter as HHmm (HH= hour 00~23, mm= minute 00~59))
Press HOLD/SAVE button.
●
Procedure
(Not available in GDK-16/20W)
Procedures
t tt d t t ti
48
KD, KD/E, LKD Series
,