Table of Contents
Advertisement
ECO DECT
ECO DECT
ECO DECT uses less energy and reduces transmission power.
Reducing transmission power (radiation)
In normal operation (default setting):
The device range is set to maximum as default. This guarantees optimum wireless management.
In idle status, the handset will not function (as it is not transmitting). Only the base will maintain
contact with the handset via a low wireless signal. During a call, the transmission power
automatically adapts to the distance between the base and handset. A closer distance to the
base means lower transmission power.
You can reduce the transmission power even further:
1) Reducing the range and thereby lowering transmission power by up
to 80%
In many spaces such as apartments, business rooms and offices, the maximum range is not
necessary. If you deactivate the Maximum Range setting, you can reduce the transmission
Ï
power during a call by up to 80%, using half of the range.
¤
¤
¤
v
q ECO DECT
OK
Display icon for reduced range
This setting cannot be used with a repeater (
2) Deactivating DECT wireless module in idle status (Eco Mode+)
With the No Radiation setting, you can deactivate the transmission power of the base
Ï
completely during idle status.
¤
¤
¤
v
q ECO DECT
OK
When the wireless model is deactivated, the icon ¼ is displayed in idle status instead of the
signal strength icon.
This setting cannot be used with a repeater (
Notes
u
To enjoy the benefits of the No Radiation setting, all registered handsets must support
this feature.
u
When the No Radiation setting is activated and a handset is registered to the base that
does not support this feature, No Radiation will automatically be deactivated. As soon as
this handset is de-registered, No Radiation will automatically be re-activated.
u
The wireless connection will only be established for an incoming or outgoing call and the
connection will be delayed by about 2 seconds.
u
So that a handset can establish a wireless connection with the base more quickly for an
incoming call, it must "listen" to the base more often, i.e. scan the environment. This
increases power usage and reduces the standby and talktime duration of the handset.
u
When No Radiation is activated, there will be no range display/range alarm on the
handset. Contactability can be tested by assigning a line: Press and hold the Answer call
c
key
. You will hear the ringing tone.
32
¤
¤
OK
Maximum Range
¢
page 49.
¢
page 30).
¤
¤
q No Radiation
OK
¢
page 30).
¤
³
Change (
= activated)
¤
³
Change (
= activated)
bg cs en hr ro sk sl sr
Advertisement
Table of Contents
