Whirlpool ARC 1800 Instruction Manual page 7

Built in wine cooler
Hide thumbs

Advertisement

1. Screws
4. Decorative nails
7. Door bracket
10. Top hinge (left)
1. Take out the 4 screws (1) from the top hinge (right) (2) and remove the top hinge
(right), then remove the door. (Fig.A)
2. Store the door safety and take out the lock hole decorative cover (3) and the
decorative nails (4) from the top of the door frame, unscrew the 2 screws (5) at
bottom and remove the door axis (right) (6), then install the lock hole decorative
cover (3) and the decorative nails (4) at bottom. Please install the spare left door
axis at the top of the door frame. (Fig.B)
3. Remove the door bracket (7) from the lower hinge (left)(8) and install it into the
lower hinge (right )(9). (Fig.C)
4. Rotate the door 180 degrees, install the door axis at the lower hinge (left) and
install the door onto the lower hinge (left), then close the door carefully.
5. Fix the spare top hinge (left) (10) onto the top of the cabinet (left) with the 4
screws (1), then adjust the door. (Fig. D)
Note: This is a two person operation.
2. Top hinge (right)
5. Screws
8. Lower hinge (left)
6
3. Lock hole decorative
cover
6. Door axis (right)
9. Lower hinge (right)

Advertisement

loading