Table of Contents
Advertisement
B. OPERATING INSTRUCTIONS
CONTROL PANEL
Run
Indicator light illuminates to signify the cooling mode is currently in
operation
Light
To turn on/ off the inner light
Power
To switch on/ off the appliance (press and hold for approximately 3
seconds)
Set Upper
To set the temperature of the upper chamber
Set Lower
To set the temperature of the lower chamber
Upper
To display the actual temperature in the upper compartment
Chamber
Lower
To display the actual temperature in the lower compartment
Chamber
TEMPERATURE SETTING
• The default temperature of the upper compartment is 6 ℃ while the default
temperature of the lower compartment is 12 ℃. Once the appliance is
unplugged, the system will return to the default temperature setting.
• To set the temperature of the upper or lower compartment, press the "Set
Upper" or "Set Lower" button. The LED display will flash and display the
temperature being set.
• Press the button once to decrease or increase the temperature by 1 ℃. When
the minimum value that can be set has been exceeded, it will jump to the highest
adjustable temperature value automatically. The LED display will stop flashing
once the button has not been pressed for 5 seconds. It will revert back to
displaying the actual temperature of the upper or lower compartment.
The temperature of the upper compartment can be adjusted from 5℃ to 18℃.
The temperature of the lower compartment can be adjusted from 5℃ to 18℃.
Attention:
• If the appliance is unplugged or power lost occurred, you must wait 3 to 5
minutes before restarting the appliance. If you attempt to restart before this
time delay, the wine cooler will not start. For first time use or long period of
non‐use, the temperature will differ between the setting temperature and the
LED display temperature. The temperature will revert back to normal after
running for a period.
4
Advertisement
Table of Contents
