Any claims should be filed immediately with the transportation company. ELECTRICAL REQUIREMENTS Voltage for your grill is 120 Volt, 60 Cycle, single phase. The 8200 will draw a maximum of 14.33 amp.. Your electrician must furnish sufficient current for the proper operation of your machine. We recommend that this machine be installed on a dedicated line.
2. Empty drip pan. 3. Wash drip pan as necessary with soap and water. 4. Clean stainless steel portion of unit with damp cloth and dry. 5. Clean cook top Watchdog Concession Equipment Cleaner. (Gold Medal Item #2580) Model # 8200...
3. Please include your model name, serial number, and date of manufacture (located on the machine nameplate) with your order. 4. Address all parts orders to: Parts Department Gold Medal Products Co. 10700 Medallion Drive Cincinnati, Ohio 45241-4807 (800) 543-0862...
Page 7
Lead-In Cord Assy. 87297 Heat Control 17098 Rear Panel 17097 Front Plate 17099 Control Guard 85040 Element Clamp 85027 Element Clamp Retainer 85108 Heat Element 17100 Control Box 42616 4” NSF Legs 17102 Bottom Plate Weldment 50013 Magnets Model # 8200...
Page 8
__________________________________________________________________________________Fence Grills Electrical Schematic Model # 8200...
__________________________________________________________________________________Fence Grills WARRANTY WE WARRANT to the original purchaser the Gold Medal equipment sold by us to be free from defects in material or workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or replacement of any...