ELECTRICAL REQUIREMENTS Voltage for your grills is 120 Volt, 60 Cycle, single phase. 8223, 8224 grills will draw a maximum of 11.5 amps. The 8225 will draw 1940 amps and requires a 20 amp plug. Your electrician must furnish sufficient current for the proper operation of your machine.
THERE ARE TWO SETS OF THESE CONTROLS, ONE FOR EACH SET OF ROLLERS CARE AND CLEANING The stainless steel body of the grill is easy to keep clean. Usually a damp cloth will remove all dirt and grease spots. NEVER USE ABRASIVES on the stainless steel body. Models #8223, #8224, #8225...
3. Please include your model name and machine serial number (located on the machine nameplate) with your order. 4. Address all parts orders to: Parts Department Gold Medal Products Co. 10700 Medallion Drive Cincinnati, Ohio 45241-4807 or, place orders at: (513) 769-7676 (800) 543-0862 Fax: (513) 769-8500 E-mail: goldme19@eos.net Models #8223, #8224, #8225...
WARRANTY WE WARRANT to the original purchaser the Gold Medal equipment sold by us to be free from defects in material or workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or replacement of any...
Need help?
Do you have a question about the 8223 and is the answer not in the manual?
Questions and answers