Table of Contents
Advertisement
To start a Telnet
session
E-DOC-CTC-20051017-0149 v1.0
Proceed as follows:
1
Open a telnet application.
You can use the Command Prompt window.
In Microsoft Windows XP for instance:
1
On the Windows taskbar, click Start.
2
Select (All) Programs > Accessories > Command Prompt
2
Connect to your SpeedTouch™.
In the Command Prompt window:
At the prompt, type
SpeedTouch™ (192.168.1.254 by default).
3
Enter your SpeedTouch™ security user name and password.
The default user is 'Administrator' and the default password is blank.
As soon as you have opened a session to the CLI, the SpeedTouch™ banner is
displayed, followed by the CLI prompt, as shown in the example below.
Username : Administrator
-----------------------------------------------------------------------
-
*
*
*
*
_____/__
*
_/
*
//
*
_______//_______/
*
/
/ \
*
__/
/
\
*
/ /
/
\_______\/
* /_/______/___________________/ /________/ /___/
* \ \
\
___________
*
\_\
\
/
*
\
\/
*
\_____/
*
/__________/
*
\
_____
*
\ /
/\
*
/____/
\
*
\
\
/___\/
*
\____\/
-----------------------------------------------------------------------
{Administrator}=>
telnet
followed by the IP address of your
______
SpeedTouch
___/_____/\
/
/\\
Version 5.4
/
\\
/\_____/___ \
Copyright (c) 1999-2005,
/
\
/\ \
\
/ _\/______
\
/
/ /
/\
\
/
/ /
/ _\__
/ /
/ /
\ \
\ \
/\
\ \
\ \___\/
/
\
\ \
\
/
\
\ \________\/
\
\
/
\
/_____\/
\
/___\/
\
/
Chapter 1
Getting to know your SpeedTouch™
.
THOMSON
/\
\
\
/
/
9
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
