Items Supplied With Unit; Hanging The Boiler - Buderus 600 - 11R Installation And Servicing Instructions

1.4

Items supplied with unit

Check the contents against the packing list to ensure
that no parts are missing.
Key to fig. 1:
item 1: Wall-mounted condensing gas boiler
item 2: Wall bracket
item 3: Technical documents
item 4: CH Flow connection pipe
item 5: CH Return connection pipe
item 6: Gas service valve
item 7: Plastic bag containing the following accessories:
2 x wall fixing-screws
2 x wall plugs
2 x washers
Seals (2 x ¾")
Square wrench
Initial start-up sticker
Second identification plate
1.5

Hanging the boiler

The boiler is transported in a horizontal position.
Open the box and remove the four foam supports
(fig. 2, item 1). The casing is not attached to the
boiler.
Take out the casing (fig. 2, item 2) and put aside
during installation.
CAUTION!
Do not carry the boiler by the casing at
any time.
CAUTION!
Hang the wall mounting template.
Drill the necessary holes.
Take out the wall bracket (fig. 1, item 2) and attach to
the wall using the wall mounting template.
Take out the condensing gas boiler (fig. 2, item 3)
and hang onto the wall bracket (fig. 3).
Dispose of packaging.
Subject to modifications resulting from technical improvements!
Installation and servicing instructions for wall-mounted condensing gas boiler Buderus 600 - 11R/19R/24R • 02/2006
1
Fig. 1 Items supplied with unit
Fig. 2 Unpacking the box
Fig. 3 Installation
Buderus • http://www.buderus-domestic.co.uk
Installation 1
2
5
4
3 6
7
1
2
3
17