13.2 Remote Control Button
13.2.1 SET Button
•
To check remote control transmission code and store the transmission code to EEPROM
Press "Set" button for more than 10 seconds by using pointer
o
Press "Timer Set" button unit a "beep" sound is heard as confirmation of transmission code change.
o
•
To change the air quality sensor:
Press and release by using pointer
o
Press the "Timer Decrement" button to select sensitivity:
o
1. Low sensitivity
2. Standard (Default)
3. Hi sensitivity
Confirm setting by pressing "Timer Set" button, a "beep" sound will be heard. LCD returns to original display
o
after 2 seconds.
LCD returns to original display if remote control does not operate for 30 seconds.
o
13.2.2 CLOCK Button
•
To change the remote control time format:
Press for more than 5 seconds
o
13.2.3 RESET (RC) Button
•
To clear and restore the remote control setting to factory default.
Press once to clear the memory
o
13.2.4 TIMER ▲
•
To change indoor unit indicators' intensity:
Press continuously for 5 seconds.
o
13.2.5 TIMER ▼
•
To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
Press continuously for 10 seconds.
o
40