Tiller Attachments - Troy-Bilt 664D-Pony Operator's Manual

Rear-tine tiller
Hide thumbs Also See for 664D-Pony:
Table of Contents

Advertisement

Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to
WARNING
come to a complete stop, disconnect spark plug wire and move wire away from spark plug.
Remove the key from the keyswitch on units so equipped.
Failure to follow these instructions can result in serious personal injury or property damage.
The attachments listed below are available for your tille Contact your authorized dealer or the factory for current information.
BUMPER — MODEL OEM-290-254
The tubular steel bumper helps to protect the engine from damage.
HILLER/FURROWER — MODEL OEM-290-251
The furrower blade attaches to the back of the depth regulator assembly and is used to create rows, trenches and ditches up to 8"
deep, depending on soil conditions. The two hiller wings attach to the sides of the furrower blade and are used to make hilled rows
and raised bed gardens.
ROW MARKER— MODEL OEM-290-257
The row marker attaches to the hiller/furrower attachment and is used to scratch lines in the seedbed for laying out furrows,
trenches, raised beds, etc. (eliminates the need for stakes, string and measuring tape). The row marker is adjustable in length from
28" to 49-3/4", allowing you to vary the width of the marked rows as required.
MAINTENANCE SCHEDULE
PROCEDURE
Check motor oil level
Clean engine
Check drive belt tension
Check nuts and bolts
Change motor oil
Lubricate tiller
Service foam pre-cleaner air filter
(if so equipped)
Service paper air filter (if so equipped)
Check gear oil level in transmission
Check tines for wear
Check air pressure in tires
Service spark plug
NOTES
1 -
After first 2 hours of break-in operation.
2 -
Before each use.
3 -
Every 5 operating hours.
4 -
Every 10 operating hours.
5 -
Every 30 operating hours.
6 -
More frequently in dusty or dirty conditions.
7 -
See Engine Owner's Manual for service
recommendations.
8 -
Whichever time interval occurs first.

TILLER ATTACHMENTS

Section 5: Maintenance
NOTES
2, 3
2, 7
1, 4
1, 4
1, 4, 6
4
7
7
1, 5
5
5
7
27

Advertisement

Table of Contents
loading

Table of Contents