Tiller Attachments - Troy-Bilt 12211 Owner's Manual

WARNING
Before inspecting, cleaning or servicing the unit, shut off engine, wait for all parts to come to a
complete stop, disconnect spark plug wire and move wire away from spark plug. Remove ignition key on elec-
tric start models. Failure to follow these instructions can result in serious personal injury or
property damage.
The attachments listed below are available for your tiller. The information is the most current at the time this manual was printed.
Contact your authorized dealer or the factory for current information.
BUMPER
The tubular steel bumper helps to protect the engine from damage.
HILLER/FURROWER
The furrower blade attaches to the back of the depth regulator assembly and is used to create rows,
trenches and ditches up to 8" deep, depending on soil conditions. The two hiller wings attach to the sides
of the furrower blade and are used to make hilled rows and raised bed gardens.
ROW MARKER
The row marker attaches to the hiller/furrower attachment and is used to scratch lines in the seedbed for
laying out furrows, trenches, raised beds, etc. (eliminates the need for stakes, string and measuring tape).
The row marker is adjustable in length from 28" to 49-3/4", allowing you to vary the width of the marked
rows as required.

TILLER ATTACHMENTS

Section 5: Maintenance
31