Table of Contents
Advertisement
06 Wheels and tires
Tire Sealing System
7. Check the tire's inflation pressure on the
gauge. Switch off the compressor briefly to
get a clear reading from the pressure
gauge.
8. Refer to the tire inflation tables for the cor-
rect inflation pressure. If the tire needs to
be inflated, start the tire sealing system's
compressor (press the on/off switch to
position I). If necessary, release air from the
tire by turning the air release knob coun-
terclockwise.
CAUTION
The compressor should not be used for
more than 10 minutes at a time to avoid
overheating.
9. Turn off the compressor (press the on/off
switch to position 0) when the correct infla-
06
tion pressure has been reached.
10. Unscrew the hose from the tire's inflation
valve and reinstall the valve cap.
11. Disconnect the electrical wire from the
12-volt socket.
242
I n f o r m a t i o n P r o v i d e d b y :
Advertisement
Table of Contents
