Table of Contents
Advertisement
04 Comfort and driving pleasure
Rear Park Assist Camera (PAC)*
Vehicles equipped with Park Assist
04
If the vehicle is equipped with the optional Park
Assist system, the distance to an object will be
indicated more exactly and colored markers in
the display indicate which of the sensor(s) has
detected the object.
The markers change color (from yellow to
orange to red) as the vehicle comes closer to
the object.
Marker (color)
Green
Yellow
Red
*
190
Option/accessory, for more information, see Introduction.
Settings
To make PAC system settings, press the
MENU button in the center console control
panel and go to
and select one of the following:
Parking camera settings
•
Mark
lines while backing up.
•
Mark
intersecting lines while backing up.
Activating the system
•
Mark
time reverse gear is selected.
•
Mark
Summary
•
The camera is activated when the gear
selector is moved to R (this can be
changed in the settings menu) and the
image is shown on the navigation system's
display.
•
When backing up, two solid lines are pro-
Distance to
jected on the screen to show the path that
object
the vehicle's rear wheels will take. These
lines are affected by movements of the
> 5 ft (1.5 m)
steering wheel. The vehicle's approximate
outer dimension are shown by two dashed
5–1 ft (0.3–1.5)
lines.
0–1 ft (0–0.3)
Main menu
Car settings
Park Assist lines
to display the side-
Distance information
to display the
Automatic
to activate PAC each
Off
to turn off PAC completely.
I n f o r m a t i o n P r o v i d e d b y :
•
The graphic lines will not be displayed
when backing up with a trailer that is con-
nected to the vehicle's electrical system.
•
Objects on the ground that are closer than
1 ft (30 centimeters) cannot be detected by
the camera.
•
The camera is active for approx.
5 seconds after the gear selector is moved
to R or until the vehicle's speed exceeds
6 mph (10 km/h).
•
The optional Park Assist sensors and the
parking camera work together and infor-
mation from the sensors is shown graphi-
cally on the display.
•
If the Park Assist* system's sensors detect
a trailer, the camera will zoom in on the
trailer hitch to help position the trailer's
tongue correctly.
•
The graphic lines shown on the screen
when the vehicle backs up can be disabled
in the settings menu.
•
Automatic or manual zoom can be
selected in the settings menu.
Advertisement
Table of Contents
