Table of Contents
Advertisement
03 Your driving environment
Starting the engine
Start
03
Ignition switch with remote key inserted (see
page 78 for more information on ignition modes)
WARNING
Before starting the engine:
•
Fasten the seat belt.
•
Check that the seat, steering wheel and
mirrors are adjusted properly.
•
Make sure the brake pedal can be
depressed completely. Adjust the seat
if necessary.
1
On vehicles with the optional keyless drive, it is only necessary to have a remote key in the passenger's compartment.
2
If the vehicle is moving, it is only necessary to press the START/STOP ENGINE button to start the vehicle.
*
108
Option/accessory, for more information, see Introduction.
1. Insert the remote key into the ignition slot
with the metallic key blade pointing out-
ward (not inserted into the slot)
lightly on the remote key. It will be auto-
matically drawn into the ignition slot in the
correct position.
2. Depress the brake pedal
2
.
3. Press and release the START/STOP
ENGINE button. The autostart function will
operate the starter motor until the engine
starts.
The starter motor operates for a maximum
of 10 seconds. If the engine has not
started, repeat the procedure.
NOTE
Keyless drive*
To start a vehicle equipped with the keyless
drive feature, one of the remote keys must
be in the passenger compartment. Follow
the instructions in step 3 to start the vehicle.
I n f o r m a t i o n P r o v i d e d b y :
WARNING
An extra mat on the driver's floor can cause
1
. Push
the accelerator and/or brake pedal to catch.
Check that the movement of these pedals is
not impeded. Not more than one protective
floor covering may be used at one time.
Advertisement
Table of Contents
