Table of Contents
Advertisement
Reinforcing the bass—BASS BOOST
You can boost the bass level—Bass Boost.
• Once you have made an adjustment, it is memorized for
each source.
B BOOST ON
Select to boost the bass level.
The B.BOOST indicator lights up on the
display.
B BOOST OFF
Select to deactivate the Bass Boost.
Initial setting:
OFF
NOTE
This function affects only the sound coming out through the front
speakers.
From the remote control:
Press B.BOOST repeatedly to select either
one of the above.
Attenuating the input signal—
INPUT ATT
When the input level of analog source is too high, the sound
will be distorted. If this happens, you need to attenuate the
input signal level to prevent the sound distortion.
• Once you have made an adjustment, it is memorized for
each source.
• You cannot adjust directly from the remote control.
ATT ON
Select to attenuate the input signal level.
The INPUT ATT indicator lights up on the
display.
ATT NORMAL
Select to deactivate attenuation.
Initial setting:
NORMAL
Adjusting the sound parameters for
the Surround/DSP modes
You can adjust the Surround/DSP sound parameters to your
preference.
• For details about the Surround/DSP modes, see pages 39 to
44.
7 Adjusting the effect level for DSP modes—
This setting is available only when one of the DSP modes
(except All Channel Stereo) is in use. To activate DSP mode,
see pages 43 and 44.
• Once you have made an adjustment, it is memorized for
Adjustable range: 1 to 5 (in 1 step intervals)
Initial setting:
As the number increases, the effect becomes stronger.
Normally, select "3."
From the remote control:
Press EFFECT repeatedly to select the
level you want to adjust.
B.BOOST
7 Adjusting the virtual room size for DSP
This setting is available only when one of the DSP modes
(except All Channel Stereo) is in use. To activate DSP mode,
see pages 43 and 44.
• If "SURROUND SPK" is set to "NO" (see page 30), this item is
• Once you have made an adjustment, it is memorized for
• You cannot adjust directly from the remote control.
Adjustable range: 1 to 5 (in 1 step intervals)
Initial setting:
As the number increases, the interval between reflections
increases so that you will feel as if you were in a larger room.
Normally, select "3."
7 Adjusting the liveness effect for DSP
This setting is available only when one of the DSP modes
(except All Channel Stereo) is in use. To activate DSP mode,
see pages 43 and 44.
• If "SURROUND SPK" is set to "NO" (see page 30), this item is
• Once you have made an adjustment, it is memorized for
• You cannot adjust directly from the remote control.
Adjustable range: 1 to 5 (in 1 step intervals)
Initial setting:
As the number increases, the attenuation level of reflections
over time decreases so that acoustics change from "Dead" to
"Live."
Normally, select "3."
EFFECT
each DSP mode.
3
modes—ROOM SIZE
not adjustable.
each DSP mode.
3
modes—LIVENESS
not adjustable.
each DSP mode.
3
EFFECT
37
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
