Activating The Ex/Es/Pliix Setting-Ex/Es/Pliix - JVC RX-D411S Instructions Manual

7 Setting the speaker distance
The distance from your listening position to the speakers is
one of the important elements to obtain the best possible
sound effect from the Surround/DSP modes.
By referring to the speaker distance, the receiver automatically
sets the delay time of the sound through each speaker so that
sounds through all the speakers can reach you at the same
time.
• Measuring unit—DIST UNIT
Select which measuring unit you use.
D UNIT meter Select to set the distance in meters.
D UNIT feet Select to set the distance in feet.
Initial setting: meter
• Speaker distance—
FRONT L DIST (for the left front speaker), FRONT R DIST
(for the right front speaker), CENTER DIST (for the
center speaker), SURR L DIST (for the left surround
speaker), SURR R DIST (for the right surround speaker),
S BACK L DIST (for the left surround back speaker),
S BACK R DIST (for the right surround back speaker)
Adjustable range: 0.3 m to 9.0 m in 0.15 m intervals
(1 ft to 30 ft in 0.5 ft intervals)
Initial setting: 3.0 m (10 ft) for all speakers
FL
SL
SBL
In this case, set the distance as follows:
Left front speaker (FL):
Right front speaker (FR):
Center speaker (C):
Left surround speaker (SL):
Right surround speaker (SR):
Left surround back speaker (SBL):
Right surround back speaker (SBR): 2.4 m (8 ft)
NOTES
• You cannot set the speaker distance for the speakers you have set
to "NO."
• If you have selected "1SPK" for "S BACK OUT" (see page 30), "S BACK
DIST" appears instead of "S BACK L DIST" and "S BACK R DIST."
C
FR
3.3 m
(11 ft)
2.7 m
(9 ft)
3.0 m
(10 ft)
2.1 m
(7 ft) 2.4 m
(8 ft)
SR
SBR
3.0 m (10 ft)
3.0 m (10 ft)
3.0 m (10 ft)
2.7 m (9 ft)
2.7 m (9 ft)
2.4 m (8 ft)
Activating the EX/ES/PLIIx setting—
EX/ES/PLIIx
Depending on this setting, available Surround modes for
digital multi-channel software vary—EX/ES/PLIIx (7.1-
channel) reproduction or 5.1-channel reproduction. Select an
appropriate setting for your enjoyment.
• For details about relation between EX/ES/PLIIx setting and
available Surround mode, see page 42.
• To activate the Surround mode, see page 43.
AUTO According to the incoming signal, an
appropriate Surround mode is applied.
• For Dolby Digital Surround EX and DTS-ES
software, 7.1-channel reproduction is
applied*.
• For other multi-channel (4 channels or
more) encoded software, 5.1-channel
reproduction is applied.
ON Select to apply 7.1-channel reproduction to
both 5.1-channel and 6.1-channel encoded
software.
PLIIx MOVIE Select to apply PLIIx MOVIE (7.1-channel)
reproduction to both 5.1-channel and 6.1-
channel encoded software.
PLIIx MUSIC Select to apply PLIIx MUSIC (7.1-channel)
reproduction to both 5.1-channel and 6.1-
channel encoded software.
OFF Select to cancel the EX/ES/PLIIx (7.1-
channel) reproduction.
Initial setting: AUTO
* For some Dolby Digital Surround EX software, Dolby Digital
5.1-channel reproduction ("DOLBY DIGITAL") may be
applied even though you have selected "AUTO." In this case,
select "ON" to apply "DOLBY D EX." (See page 42.)
NOTES
• This function is not available when "SURROUND SPK" is set to "NO"
(see page 30).
• When "S BACK SPK" is set to "NO" (see page 30), the Virtual
Surround Back (see page 43) is applied for EX/ES/PLIIx (7.1-channel)
reproduction.
From the remote control:
Press EX/ES/PLIIx repeatedly to select
either one of the above.
EX/ES/PLIIx
31