Handlebar Adjustment - Polaris OUTLAW 90 Owner's Manual

Table of Contents

Advertisement

Maintenance

Handlebar Adjustment

WARNING
Improper adjustment of the handlebars or incorrect torquing of the adjuster block tightening bolts can
cause limited steering or loosening of the handlebars, resulting in loss of control and possible serious
personal injury or death. Follow the adjustment procedures exactly, or see your POLARIS dealer for
service.
The handlebars can be adjusted for rider preference.
1. Remove the pod to access the handlebar bolts.
Loosen the four bolts.
2. Adjust the handlebar to the desired height. Be sure
the handlebars do not hit the gas tank or any other
part of the vehicle when turned fully to the left or
right.
3. Lightly tighten each bolt equally to prevent uneven
gaps in the block. Torque the bolts to 7.3 ft. lbs. (10
Nm).
142
Bolts

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sportsman 902013 outlaw 902013 sportsman 90

Table of Contents