Disassembly Of The Set - Sharp VL-NZ50S Service Manual

VL-NZ50S/H/E/W/NZ80H
VL-NZ100S/H/E

3. DISASSEMBLY OF THE SET

Note:
Before removing the cabinet, turn off the power supply, and ascertain that the battery have been removed.
1.
(c)
(c)
Battery Unit
1) Remove the battery unit.
2) Remove the 4 screws ((c)XiPSN17P03000).
2.
1) Remove the 1 screw ((q)LX-HZ0050TAFF) .
3.
(c)
(c)
1) Remove the 1 screw ((i)XiPSF17P03000) and 2 screws
2) Remove the 2 screws ((c)XiPSN17P03000) to detach the
3) Remove the 3 screws ((c)XiPSN17P03000) to detach the
4.
(q)
4
(c)
FPC
(h)
(h)
(i)
Radiation Angle
((h)XiPSF17P02000).
VCR operation PWB. Then remove the FPC of the LCD panel
and FPC of the reflector to detach the LCD panel.
radiation angle.
Lid Lock Fitting
Tilte FPC
1) Remove the 1 screw ((c)XiPSN17P03000) and disconnect
the tilt FPC to detach the main PWB.
2) Remove the lid lock fitting.
3) Remove the 3 screws ((i)XiPSF17P03000) to detach the
battery cover.
4) Remove the 2 screws ((i)XiPSF17P03000) and disconnect
the connector to detach the lens section.
(c)
LCD Panel
(c)
(c)
Main PWB
(i)
(i)
Connector
Battery Cover
(i)
(i)
(i)