Sharp VL-NZ50S Service Manual page 31

(5) Click on [Repair use].
(6) Input the necessary information for the application.
For the indispensable input items, be sure to input them.
Select the [Group/company] and [Kind name] from the list.
Input the [Model name].
Input the [Serial number].
Input the [Site/department of repair].
(7) Click on [motion].
The confirmation screen will appear.
(8) Click on [Yes].
2. Print the application result.
(1) Print out the application result screen.
Control the application result as evidence.
To print it, select "Print (P)" from the "File (F)" in the menu bar or click on the print button in the tool bar.
(2) Click on [Menu] to complete the application.
If you create applications in succession, repeat steps (1)~(8).
To complete it, click on [End] in the menu screen.
MODEL ID SETTING
Address VCR ADJ FD, FE, FF
Procedure 1) Set the unit to the VCR adjustment mode with command 12.
2) Give E
3) Assign a MODEL ID to each address.
Examples • During E
Click
Mode
2 PROM write enable with command 20.
2 PROM (IC705) replacement.
VCR STOP mode
31
VL-NZ50S/H/E/W/NZ80H
VL-NZ100S/H/E
Address FDh FEh FFh
Data 10 20 2C NZ50S
2D NZ50H
2E NZ50E/W
30 NZ80H
28 NZ100S
29 NZ100H
2A NZ100E
Model