Part 10 - Operating System Instructions; Control Panel; Whl-012 Rev; Lcd Display Descriptions - Westinghouse WBRCNG140W Installation Manual

PART 10 – OPERATING SYSTEM INSTRUCTIONS
A. CONTROL PANEL
Figure 29 – Appliance Control Panel Detail
B. LCD DISPLAY DESCRIPTIONS
Figure 30 – LCD Display Detail
LCD also features a backlit lamp that will illuminate:

When a user action is detected (a button is pressed)

The display has timed out for approximately 2 minutes
C. START-UP SEQUENCE
After the appliance is powered ON, the LCD display shows a sequence of information. The icons will flash, followed by various
indicators that describe the appliance controller and software versions. It will take the appliance roughly 15 seconds to cycle through
the Start-Up Sequence.
After start-up, the display appears as follows.
Figure 31 – Initial Display Screen Example
42

WHL-012 REV. 12.17.14