Emergency Display Function; Displaying The Emergency Information; Clearing The Emergency History - JVC HR-S9700EK Service Manual

1.6 EMERGENCY DISPLAY FUNCTION

This unit has a function for storing the history of the past two
emergencies (EMG) and displaying them on each FDP. With
the status of the VCR and mechanism at the moment an emer-
gency occurred can also be confirmed.
FDP display switching
FDP display 0 : 00 :
00
E: :
**
**
1: 2 :
* * 3 4
5: 6 :
* *
*
Notes:
• The emergency detail display 1 2 show the information
on the latest emergency.
It becomes " – – : – – : – –" when there is no latest emer-
gency record.
• When using the Jig RCU, set its custom code to match
the custom code of the VCR.
Jig RCU
[Data transmitting method]
Depress the " " ( 3 ) button
after the data code is set.
CUSTOM CODE
43: A CODE
53: B CODE
DATA CODE
Fig. 1-6-1 Jig RCU [PTU94023B]
1-6
Normal display
Emergency content display
(E:Latest:Previous)
Emergency detail display 1
Emergency detail display 2
7
INITIAL MODE
1.6.1

Displaying the emergency information

(1) Transmit the code "59" from the Jig RCU.
The FDP shows the emergency content in the form of
"E: : ".
**
* *
Example 1 E : 01 :
03
Example 2 E : – – :
– –
Note:
• For the emergency content, see "1.6.3 Emergency con-
tent description".
(2) Transmit the code "59" from the Jig RCU again.
The FDP shows the emergency detail information 1 in the
1 : 2 :
form of " ".
* * 3 4
1 : Deck operation mode at the moment of emergency
*
2
: Mechanism operation mode at the moment of emer-
*
gency
: Mechanism sensor information at the moment of
3 –
emergency
: Mechanism mode position at the moment of emer-
– 4
gency
Note:
• For the emergency detail information 1 , see "1.6.4 Emer-
gency detail information 1 ".
(3) Transmit the code "59" from the Jig RCU once again.
The FDP shows the emergency detail information 2 in the
5 6
form of " : : ".
* *
7
*
5
: Type of the cassette tape in use 1 .
*
6
: Winding position of the cassette tape in use
*
: Type of the cassette tape in use 2 (Winding area)
7
*
Note:
• For the emergency detail information 2 , see "1.6.5 Emer-
gency detail information 2 ".
(4) Transmit the code "59" from the Jig RCU once again to re-
set the display.
1.6.2

Clearing the emergency history

(1) Display the emergency history.
(2) Transmit the code "36" from the Jig RCU.
(3) Reset the emergency display.
Previous emergency
Latest emergency
No emergency record
(Y292-03e)