Emergency Display Function; Displaying The Emg Information; Clearing The Emg History - JVC HR-S5950EU Service Manual

1.3 Emergency display function

This unit saves details of the last two emergencies as the EMG
history and allows the status of the VCR and the mechanism
of each emergency to be shown both on the display and as
OSD information.
When using the emergency function, it is required to set the
VCR to the Jig RCU mode (the mode in which codes from the
Jig RCU can be received).
Jig RCU
[Data transmitting method]
Depress the " " ( 3 ) button
after the data code is set.
CUSTOM CODE
43: A
DATA CODE
Fig. 1-3a Jig RCU [PTU94023B]

1.3.1 Displaying the EMG information

The EMG detail of information can be displayed by transmit-
ting the code "59" from the Jig RCU.
Note:
• The EMG detail information <1><2> show the information on
the latest EMG.
It becomes " – – : – – : – –" when there is no latest EMG
record.
0: 00 Normal display
E: * *
EMG content display (Latest)
1E: * * EMG content display (Previous)
1: * 1 EMG detail information <1>
[Deck operation mode]
2: * 2 EMG detail information <1>
[Mechanism operation mode]
3: 34 EMG detail information <1>
[Mechanism sensor information and Mechanism mode position]
4: * 5 EMG detail information <2>
[Type of the cassette tape in use <1>]
5: * 6 EMG detail information <2>
[Winding position of the cassette tape in use]
6: * 7
EMG detail information <2>
[Type of the cassette tape in use <2> (Winding area)]
7: * 8 EMG detail information <3>
[Previous deck operation mode]
8: * 9 EMG detail information <3>
[The deck operation mode of the one before the last]
9: * 1 0 EMG detail information <3>
[The deck operation mode of the one prior to one above]
Fig. 1-3-1a EMG display of 7segment LED display model
1-4
INITIAL MODE
CODE
See 1.3.4.
See 1.3.4.
See 1.3.5.
See 1.3.5.
See 1.3.5.
See 1.3.6.
See 1.3.6.
See 1.3.6.
See 1.3.7.
See 1.3.7.
See 1.3.7.
0 : 00 : 00 Normal display (Counter or clock)
EMG content display (E:Latest:Previous)
E: * * : * *
[EMG code display mode]
*1: *2 : 34
EMG detail information <1> display
[Deck and other mode display mode]
EMG detail information <2> display
*5: *6 : *7
[Cassette display mode]
EMG detail information <3> display
*8: *9 : *10
[Deck mode history dispaly mode]
Fig. 1-3-1b EMG display of FDP display model
<Reference> EMG display of FDP display mode
(1) Transmit the code "59" from the Jig RCU.
The FDP shows the EMG content in the form of "E: * * : * * ".
<Example 1> E : 01 : 03
<Example 2> E : – – : – –
(2) Transmit the code "59" from the Jig RCU again.
The FDP shows the EMG detail information <1> in the form
of " * 1 : * 2 : 34 ".
* 1 : Deck operation mode at the moment of EMG
* 2 : Mechanism operation mode at the moment of EMG
3– : Mechanism sensor information at the moment of
EMG
–4 : Mechanism mode position at the moment of EMG
(3) Transmit the code "59" from the Jig RCU once again.
The FDP shows the EMG detail information <2> in the form
of " * 5 : * 6 : * 7 ".
* 5 : Type of the cassette tape in use <1> .
* 6 : Winding position of the cassette tape in use
* 7 : Type of the cassette tape in use <2> (Winding area)
(4) Transmit the code "59" from the Jig RCU once again.
The FDP shows the EMG detail information <3> in the form
of "*8 : *9 : *10".
* 8 : Previous deck operation mode at the moment of
EMG
* 9 : The deck operation mode of the one before the last
at the moment of EMG
* 10 : The deck operation mode of the one prior to one
above at the moment of EMG
(5) Transmit the code "59" from the Jig RCU once again to re-
set the display.
1.3.2

Clearing the EMG history

(1) Display the EMG history.
(2) Transmit the code "36" from the Jig RCU.
(3) Reset the EMG display.
See 1.3.4.
See 1.3.5.
See 1.3.6.
See 1.3.7.
Previous EMG
Latest EMG
No EMG record