Product Specifications
Functional Development Specifications
D etailed Settings (User Settings)
1. If you want to set the detailed settings, press the User Set button.
You will enter the User Set mode, and the [Main Menu] will be displayed.
2. Refer to the Wired Remote Controller's User Set list on the next page to select the desired menu.
Using the [ ∧ ]/[ ∨ ] buttons, select a main menu number and press the
Using the [ ∧ ]/[ ∨ ] buttons, select a sub-menu number and press the
Once you have entered the setting screen, the current setting will be displayed.
Refer to the chart for data setting.
Using the [ ∧ ]/[ ∨ ] buttons, change the settings and press the
Press the Set button to save the setting and exit to the sub-menu setting screen.
Press the Esc button to exit to general mode.
● While setting the data, you can use the [>]/[<] buttons to set the range of SEG used.
● While configuring the setting, press the Esc button to exit to the sub-menu setting screen without saving the setting.
2-8
(cont.)
Main Menu Sub Menu
SEG Used
1 2 3
4
5
6
button to enter the sub-menu setting screen.
[ > ]
button to enter the data setting screen.
[ > ]
button to move to the next setting.
[ > ]
Samsung Electronics