Samsung MWR-WE10 Service Manual page 13

Product Specifications
Functional Development Specifications
 I nstallation/Service Modes
1. If you want to use the various additional functions for your Wired Remote Controller, press the Set and Esc buttons
at the same time for more than three seconds.
 You will enter the additional function settings, and the [main menu] will be displayed.
2. Refer to the list of additional functions for your Wired Remote Controller on the next page, and select the desired
menu.
 Using the [ ∧ ]/[ ∨ ] buttons, select a main menu number and press the
 Using the buttons, select a sub-menu number and press the
[ ∧ ]/[ ∨ ]
 When you enter the setting stage, the current setting will be displayed.
 Refer to the chart for data settings.
 Using the buttons, select the settings. Press the
[ ∧ ]/[ ∨ ]
 Press the Set button to save the settings and exit to the sub-menu setting screen.
 Press the Esc button to exit to normal mode.
● While setting the data, you can use the [＜]/[＞] buttons to set the range of Data bit.
● While configuring the setting, press the Esc button to exit to the setting sub-menu without saving your changes.
2-10
(cont.)
Main Menu Sub Menu
[ ＞ ]
Data bit
1 2 3 4 5 6
[ ＞ ] button to enter the sub-menu setting screen.
button to enter data setting screen.
[ ＞ ]
button to move to the next setting.
Samsung Electronics