Burner Adjustment - Vermont Castings VCS Series User Manual

Care & Maintenance
Maintenance

BUrner aDjUsTMenT

NOTICE
It may be necessary to adjust the burners periodically, to com-
pensate for variables in gas characteristics. If you notice the
burner flame pattern is irregular (Refer to Page 14, Figures 9a,
9b & 9c), it may be necessary to adjust the air shutter opening
at the front of the venturi tubes.
• The shutters are accessible under the control panel at the
front of the Grill. (Fig. 19)
• Use a screwdriver to loosen the locking screws. Open the
shutter just enough to achieve the desired soft, blue flames.
Make adjustments in small increments and allow the burner
to come up to operating temperature (10 min.) before mak-
ing further adjustments.
WarnInG
Always allow sufficient time for the Grill to cool to a safe tem-
perature before handling or cleaning any of its components.
If burners are removed for cleaning or adjustment, always
confirm that they have been reinstalled correctly over the
valve outlets. (Fig. 0) The valves should extend into the
burner venturis 1/4" minimum.
NOTICE
Similar adjustment can be made to Rotisserie and/or
Side Burners, if so equipped.
30
Figure 19
Turn Shutter
Clockwise to Open
Figure 20
Venturi Tube
Loosen the
Locking Screw
B139
Valve Outlet
1/4" Minimum
B140
30005801