Panasonic Lumix DMC-LX100 Owner's Manual page 319

Wireless access point is not displayed. Or it cannot be connected.
• Check if the wireless access point to connect is in operating state.
• The camera may not display or connect to a wireless access point depending on the radio wave
condition.
→ Perform the connection closer to the wireless access point.
→ Remove the obstacles between this unit and the wireless access point.
→ Change the direction of this unit.
• It may not display even if the radio waves exist depending on the setting of the wireless access
point.
→ Check the settings of the wireless access point.
• The wireless access point may not be found depending on the radio wave condition.
→ Perform the [Manual Input].
• Is the network SSID of the wireless access point set not to broadcast?
→ It may not be detected when it is set not to broadcast. Enter and set the network SSID.
• Connection methods differ depending on the wireless access point.
→ Refer to the operating instructions of the wireless access point.
It takes long time every time to connect to a smartphone.
• It may take longer time to connect depending on the Wi-Fi connection setting of the smartphone,
but it is not a malfunction.
This unit is not displayed in the Wi-Fi setting screen of the smartphone.
→ Try switching the ON/OFF of the Wi-Fi function in the Wi-Fi settings of the smartphone.
I have forgotten the login ID or password for the "LUMIX CLUB".
• Check the information in the login screen of "LUMIX CLUB".
http://lumixclub.panasonic.net/eng/c/
319
(→266)
Others
Q&A Troubleshooting
(→265)
SQW0021