Changing the firing mode (Manual flash)
Recording mode:
You can select whether the flash output is set automatically or manually.
1
Set the menu
→
2
Use
to select the item and press [MENU/SET]
[TTL]
[MANUAL]
●
When [MANUAL] is selected, the flash ratio (e.g. [1/1]) is displayed with the flash icon on the
screen.
■
Setting the flash ratio (When [MANUAL] is selected)
Set the menu
→
Press
to select an item and press [MENU/SET]
• You can set the flash ratio from [1/1] (flash firing full power) to [1/64] in 1/3 steps.
179
[Rec] → [Flash] → [Firing Mode]
The camera automatically sets the flash output.
You can set the flash ratio manually. Using [TTL] allows you to take a picture
as intended, even for dark scenes where the flash output tends to be higher.
[Rec] → [Flash] → [Manual Flash Adjust.]
Stabilizer, Zoom and Flash
Taking pictures using the flash (supplied)
SQW0021