Panasonic Lumix DMC-LX100 Owner's Manual page 246

[Send Images Stored in the Camera]
1
Set the menu
→ [New Connection] → [Send Images Stored in the Camera]
→ [AV device]
2
Select [Via Network] or [Direct] to connect
3
Select the device you wish to connect to
• When the connection is established, the confirmation screen for the transmission setting is
displayed. Check the setting and press [MENU/SET]. To change the send setting, press [DISP.]
button. (→271)
4
Select [Single Select] or [Multi Select]
[Single Select]
Select the picture
Press [MENU/SET]
[Multi Select]
Select the picture (repeat)
• If selected again, the setting will be canceled.
Select [OK]
• The number of pictures that can be sent by [Multi Select] is
limited.
• A confirmation screen is displayed. If you select [Yes], the operation is executed.
• To change the send setting, press [DISP.] button.
• To close the connection, select [Exit].
246
Sending pictures to AV device
(→263)
Wi-Fi
1 2 3
OK
4 5 6
SQW0021