Memory Card Slot - Panasonic Lumix DMC-LX100 Owner's Manual

Hide thumbs Also See for Lumix DMC-LX100:
Table of Contents

Advertisement

To connect with an HDMI micro cable
Check the [HDMI Mode].
To play back 24p motion pictures, set [HDMI Mode] to [AUTO]. Otherwise, the picture is not
output at 24 frames per second.
Bars may appear at the sides or at the top and bottom of the screen, depending on the aspect
ratio setting.
Cables that do not comply with HDMI standards will not work.
When an HDMI micro cable is connected, pictures are not displayed on the screen.
HDMI output will be canceled if a USB connection cable (supplied) is connected simultaneously.
When the AV cable (optional) and HDMI micro cable are connected at the same time, no picture
is output from the AV cable.
Pictures may be momentarily distorted immediately after commencing playback or pausing on
certain televisions.
Audio output is stereo.
Read the operating instructions for the TV.
To connect with an AV cable (optional)
Check the [TV Aspect].
Always use a genuine Panasonic AV cable (DMW-AVC1: optional).
Pictures rotated to portrait may be blurred slightly.
Change picture mode settings on TV if aspect ratios are not displayed correctly on widescreen
or high-definition televisions.
The viewfinder display cannot be used.
Read the operating instructions for the TV.
The recorded pictures can be played back on a TV with an SD

Memory Card slot

Proper playback (aspect ratio) will be dependent on the TV used for viewing.
The file format of the motion pictures that can be played back differs depending on the
TV model.
You may not be able to play back panorama pictures. Also you cannot perform
automatic scrolling playback of panorama pictures.
For cards compatible with playback, refer to the operating instructions of the TV.
277
(→48)
(→47)
Connecting with other devices
Viewing on TV screen
SQW0021

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents