Panasonic Lumix DMC-LX100 Owner's Manual page 318

■
Wi-Fi function
It cannot connect to the wireless LAN. Radio waves get disconnected.
• Use within the communication range of the wireless LAN network.
• Connection types and security setting methods are different depending on the wireless access
point.
→ Refer to the operating instructions of the wireless access point.
• When the radio waves are interrupted, the condition may improve by moving the location or
changing the angle of the wireless access point.
• When this unit is placed on a metal table or shelf, the connection may not be established easily
because the camera is affected by radio waves. Use the camera away from metal surfaces.
• It may not automatically connect when the network SSID of the wireless access point is set not to
broadcast.
→ Set the network SSID of the wireless access point to broadcast.
• Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency
operated nearby?
→ Radio waves may get interrupted when used simultaneously. Use them sufficiently away from
the device.
• Is the 5 GHz/2.4 GHz switchable wireless access point connected to other equipment using the
5 GHz band?
→ The use of a wireless access point that can use 5 GHz/2.4 GHz simultaneously is
recommended. It cannot be used simultaneously with this camera if it is not compatible.
• When the battery indicator is flashing red, the connection with other equipment may not start or the
connection may be disrupted. (A message such as [Communication error] is displayed.)
• Perform [Reset Wi-Fi Settings] in the [Setup] menu.
318
Others
Q&A Troubleshooting
SQW0021