Connecting To A Smartphone - Panasonic Lumix DMC-LX100 Owner's Manual

Connecting to a smartphone

You can easily establish a Wi-Fi connection on the camera by pressing and holding the
[Wi-Fi] button or using the NFC function.
Preparation
Install "Image App" in advance.
1
Press and hold the [Wi-Fi] button
[Wi-Fi] button
• The information (QR Code, SSID and Password) required for
directly connecting your smartphone to this unit is displayed.
• After the second time, the screen for the previously used
connection method will appear.
• The same screen can be displayed by selecting items from the
menu as follows.
→ [New Connection] →
[Remote Shooting & View]
• When you press [MENU/SET] on the camera, the QR code is
displayed in an enlarged size. If it is difficult to read the code, use
the enlarge view. (If your smartphone cannot read the QR code,
move the camera away from the smartphone or use a connection
method other than the QR code.)
• To change the connection method, press the [DISP.] button and
select the connection method.
2
Operate the smartphone
• When the connection is complete, live images being captured by the camera are displayed on
the smartphone.
(It may take some time after the operation for the connection to be established.)
• The connection method differs depending on the smartphone used.
229
Operating the camera by connecting it to a smartphone
(→228)
Wi-Fi connection lamp
(Lit blue)
(→232)
SSID and Password
QR Code
(→230, 231)
Wi-Fi
SQW0021