Changing Settings Using The Control Ring - Panasonic Lumix DMC-LX100 Owner's Manual

Changing settings using the control ring

The "Control Ring" is an easy and convenient way to adjust several settings, depending
on the camera mode selected. You can use the control ring to change the settings of the
unit.
Items that can be set by the control ring vary depending on recording modes.
Following are the pre-assigned settings.
Recording mode
[Intelligent Auto] Mode
[Program AE] Mode
[Aperture-Priority] Mode
[Shutter-Priority] Mode
[Manual Exposure] Mode
*
You can use the control ring to change the following settings values, which cannot be set using the
shutter speed dial.
– Higher speed than 1/4000 seconds (electronic shutter (→140))
– Slower speed than 1 second (mechanical shutter (→140))
– Setting in 1/3 EV steps
●
The control ring is assigned to selecting the picture effect (Filter) when you are recording a
panorama picture.
●
When Manual Focus is set, focus adjustment is assigned to the control ring.
●
The control ring can be used to change to your preferred settings.
39
(→150)
Setting
Step Zoom (→174)
Step Zoom (→174)
Step Zoom (→174)
Shutter speed adjustment
Shutter speed adjustment
(→40)
Preparations
*
(→84)
*
(→86)
(→128)
SQW0021