Download  Print this page

Black & Decker AD600-XE Instruction Manual

Drill/screwdriver
Hide thumbs
   

Advertisement

Quick Links

Australia
AD600-XE
New Zealand

Advertisement

loading

  Summary of Contents for Black & Decker AD600-XE

  • Page 1 Australia AD600-XE New Zealand...
  • Page 2 Position Instructions...
  • Page 3: Intended Use

    Intended use 3. Personal safety a. Stay alert, watch what you are doing and use common Your Black & Decker drill/screwdriver has been designed for sense when operating a power tool. Do not use a power screwdriving applications and for drilling in wood, metal and tool while you are tired or under the influence of drugs, plastics.
  • Page 4: Specific Safety Rules

    e. Maintain power tools. Check for misalignment or The label on your tool may include the following symbols. binding of moving parts, breakage of parts and any V....volts other condition that may affect the power tools A....Amperes operation. If damaged, have the power tool repaired Hz....Hertz before use.
  • Page 5: Maintenance

    NOTE: Hints for optimum use Some battery manufacturers mark only the plus (+) ends of Always use the correct type of screwdriver bit or drill bit. ◆ the batteries. In these cases, the unmarked end of the battery If screws are difficult to tighten, try applying a small ◆...
  • Page 6: Technical Data

    Run the battery down completely, then remove it from the ◆ tool. NiCd, NiMH and Li-Ion batteries are recyclable. Take them ◆ to any authorised repair agent or a local recycling station. Technical data AD600-XE Voltage No-load speed Bit holder 1/4" (6.35 mm) Weight kg 0.3...
  • Page 8 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +0800 339 258 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 90566180...