(Original instructions) ENGLISH Intended use f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your Black & Decker drill/screwdriver has been designed protected supply. Use of an RCD reduces the risk of for screwdriving applications and for drilling in wood, metal, electric shock.
ENGLISH (Original instructions) d. Store idle power tools out of the reach of children and noise can cause hearing loss. do not allow persons unfamiliar with the power tool or Use auxiliary handle(s) if supplied with the tool. Loss these instructions to operate the power tool. Power of control can cause personal injury.
(Original instructions) ENGLISH Vibration Do not open the charger. The declared vibration emission values stated in the technical Do not probe the charger. data and the declaration of conformity have been measured in accordance with a standard test method provided by The charger is intended for indoor use only.
ENGLISH (Original instructions) Fitting and removing a drill bit or screwdriver bit Leaving the battery in the charger This tool is fitted with a keyless chuck to allow for an easy The charger and battery pack can be left connected with the exchange of bits.
(Original instructions) ENGLISH Maintenance Autosense technology In screwdrive mode, this tool is equipped with Autosense Your Black & Decker tool has been designed to operate over a technology that helps drive screws accurately and without long period of time with a minimum of maintenance. Continu- effort.
82 Taryn Drive, Epping, VIC 3076 Australia Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) NiCd, NiMH and Li-Ion batteries are recyclable. Take them to any authorised repair agent or a local recycling station. Technical data ASD14 (H1) ASD18 (H1) Voltage 14.4 No-load speed...