Selecting The Video Input Source To View - Toshiba 39L4300 Series Owner's Manual

Activating Blue Screen
When Blue Screen is set to On, the screen will turn
blue and the sound will be muted when no signal is
received.
1
From the PREFERENCES menu, press  or  to
until Blue Screen is selected.
2
Press  or  to select On or Off .
NOTE:
Some external inputs may not mute the sound.
Activating the 4:3 Stretch
When 4:3 stretch is activated, this function will
switch 4:3 format programmes into a full screen
picture.
1
From the Display Settings menu, press  or 
to select 4:3 Stretch.
2
Press  or  to select On or Off .
NOTE:
This feature is not available when Auto Format is set
to Off .
Setting No Signal Power Down
The TV will automatically turn itself off after 15
minutes when no signal is detected. You can change
the setting to Off for the following purposes:
• Low signal strength of analog channel (no signal
detection).
• Only Audio L/R is connected to an external
input in order to listen to music through the TV
speakers.
1
From the PREFERENCES menu, press  or 
until Energy Saving Settings is selected, and
then press OK.
2
Press OK.
3
Press  or  to select the item you want to
change and press  or  to select On or Off .
NOTE:
• Default setting is all On.
• A warning message will appear 1 minute before
turning off .
Confi rming software version
1
From the SETUP menu, press  or  to select
System Information and then press OK.
2
Press OK to display the software version.
NOTE:
The software version displayed is just for the
illustration.
24
Using the TV's features
Resetting the TV
Reset TV will reset all TV settings, including stored
channels, to their original factory values.
1
From the SETUP menu, press  or  to select
Reset TV.
SETUP
Country
Auto Tuning
Manual Tuning
Quick Setup
Location
System Information
Reset TV
2
Press OK to select.
A screen will appear warning that all settings
will be lost. Select Yes, and then press OK to
continue.

Selecting the video input source to view

1
Press o on the remote control until the video
input mode list appears on the screen, then
press ,  or o to select appropriate input
source (or touch p / o and U or u on the TV
left side panel to select required input source
directly).
2
Press OK.
VIDEO1 (o (1), COMPONENT/VIDEO INPUT,
standard or component video input) ,
VIDEO2 (o (2), standard video input),
HDMI1, HDMI2 (HDMI input),
PC (o RGB/PC, PC input)
Singapore
Home
Input
TV
VIDEO1
VIDEO2
HDMI 1
HDMI 2
PC