Toshiba 39L4300 Series Owner's Manual page 22

2
Press s to select a monaural mode that is
easy to hear. e Mono 1 and e Mono 2 appear
cyclically to the screen.
NOTE:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching on the
e Mono 2 mode.
Adjusting the sound Balance
1
From the SOUND menu, press  or  to select
the Balance.
2
Press  or  to adjust the settings as desired.
Using the Sound Mode
Choose your preferred Sound Mode (Dynamic,
Natural or Clear Voice).
1
From the SOUND menu, press  or  to select
the Advanced Sound Settings and then press
OK.
2
Press  or  to select the Sound Mode.
Advanced Sound Settings
Sound Mode
Equaliser
Surround
Power Bass Booster
Reset
3
Press  or  to select Dynamic, Natural or
Clear Voice.
Adjusting the sound quality
You can adjust the basic sound quality.
1
From the Advanced Sound Settings menu,
press  or  to select Bass or Treble.
2
Press  or  to adjust the settings as desired.
Using the Surround
Surround settings help to reproduce fuller, richer,
and wider sound.
1
From the Advanced Sound Settings menu,
press  or  to select Surround.
2
Press  or  to select On or Off .
22
Using the TV's features
Dynamic
Off
Super
Using the Power Bass Booster
Power Bass Booster helps to create rich bass.
1
From the Advanced Sound Settings menu,
press  or  to select Power Bass Booster.
2
Press  or  to select Normal, Super or Off .
Resetting the Advanced Sound Settings
This feature resets the Advanced Sound Settings
to the factory settings.
NOTE:
If no sound settings have been changed, Reset is not
available.
1
From the Advanced Sound Settings menu,
press  or  to select Reset, and then press
OK.
2
A confi rmation message will appear. Press  or
 to select Yes, and then press OK.
Using the Audio Distortion Control
Prevents audio distortion.
1
From the SOUND menu, press  or  to select
the Audio Distortion Control.
SOUND
MTS
Dual
Balance
Advanced Sound Settings
Audio Distortion Control
TV Mounting
Dynamic Range Control
Audio Level Offset
2
Press  or  to select On or Off .
Selecting the TV Mounting (Wall/Stand)
TV Mounting feature can provide an appropriate
sound depending on the TV installation type, that
TV is installed on a wall or a TV stand.
1
From the SOUND menu, press  or  to select
TV Mounting.
2
Press  or  to select Wall or Stand.
Auto
Dual 1
0
On
Stand
Off
0