Watching Tv Programmes; Selecting The Video Input Source To View; Channel List; Selecting The Pc/Hdmi 2 Audio Mode - Toshiba 23PB200 Series Owner's Manual

Watching TV programmes

Selecting the menu language
Choose from 10 diff erent languages (English,
Chinese (CS), Malay, Thai, Vietnamese, Russian,
Arabic, Persian French or Indonesia) for the on-
screen display.
• Use the menu: SETUP
• Use the item: Language
Changing the position
1
Enter the desired position number using the
Number buttons on the remote control.
For positions below 10, use 0 and the required
number e.g., for position 1.
2
You can also change the position by using PU or
Pu.
The position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
Note:
Changing positions between diff erent format channels
takes several seconds.
Switching between two positions
You can switch two positions without entering
actual position number each time.
1
Select the fi rst position you want to view.
2
Select the second position with the Number
buttons (0-9).
3
Press . The previous channel will be
displayed.
Each time you press
and forth between the two positions.
Changing the position
1
Press to display the following on-screen
information.
4
ABCD
The information will disappear in 6 seconds.
To erase the display instantly, press
Sorting positions
Ex.: To swap channel ABCD (Prog.1) for channel
MNOP (Prog.4):
1
From the SETUP menu, press  or  to select
Manual Tuning menu, and then press Q.
, the TV will switch back
Stereo
again.
2
Press  or  to select the channel ABCD, then
press .
Manual Tuning
Pos.
1
2
3
4
5
3
Press  to select the new position "4", then
press .
4
Press  to select the channel MNOP, then press
.
5
Press  to select the new position "1", then
press .
6
Confi rm new Manual Tuning menu.

Selecting the video input source to view

1
Press
video input mode list appears on the screen,
then press ,  or
input source (or touch p / o and U or u on
the TV left side panel to select required input
source directly).
2
Press Q.
TV (analogue aerial input),
VIDEO1 (o (1), COMPONENT/VIDEO INPUT,
standard or component video input),
VIDEO2 (o (2), standard video input),
HDMI (HDMI input),
PC (o RGB/PC, PC input)
Setting the Manual Settings menu
When the standard video input mode, this function
is available.
• Use menus: SETUP and Manual Settings
• Use items: Colour System and Label

Channel List

1
Press the
appear.
2
Press  or  to select a channel, and press Q
to watch.

Selecting the PC/HDMI 2 Audio mode

You can select PC audio or HDMI audio when using
this function.
• Use menus: SETUP and AV Connection
• Use the item: PC/HDMI 2 Audio
• Use modes: PC and HDMI
– 12 –
Label
A B C D
E F G H
I J K L
M N O P
on the remote control until the
to select appropriate
button. The Channel List will