Watching Tv Programmes; Selecting The Video Input Source To View - Toshiba 32P2300 Series Owner's Manual

Watching TV programmes

Selecting the menu language
You can select a language for the on-screen display.
• Use the menu: SETUP
• Use the item: Menu Language
Changing the position
1
Enter the desired position number using the
Number buttons on the remote control.
For positions below 10, use 0 and the required
number e.g., for position 1.
2
You can also change the position by using PU
or Pu.
The position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
Note:
Changing positions between diff erent format channels
takes several seconds.
Switching between two positions
You can switch two positions without entering
actual position number each time.
1
Select the fi rst position you want to view.
2
Select the second position with the Number
buttons (0-9).
3
Press . The previous channel will be displayed.
Each time you press
forth between the two positions.
Displaying the on-screen information
1
Press to display the following on-screen
information.
4
ABCD
The information will disappear in several
seconds.
To erase the display instantly, press
Sorting positions
Ex.: To swap channel ABCD (Prog.1) for channel
MNOP (Prog.4):
1
From the SETUP menu, press  or  to select
Manual Tuning menu, and then press OK.
2
Press  or  to select the channel ABCD, then
press .
32P2300Series̲EN.indd 12 32P2300Series̲EN.indd 12
, the TV will switch back and
Stereo
again.
– 12 –
Manual Tuning
Pos. Label
0
1 ABCD
2 EFGH
3 IJKL
4 MNOP
5
6
7
3
Press  to select the new position "4", then
press .
4
Press  to select the channel MNOP, then press
.
5
Press  to select the new position "1", then
press .
6
Confi rm new Manual Tuning menu.

Selecting the video input source to view

1
Press o on the remote control until the video
input mode list appears on the screen, then
press ,  or o to select appropriate input
source (or touch p / o and U or u on the TV
left side panel to select required input source
directly).
2
Press OK.
TV (analogue aerial input),
VIDEO1 (o (1), COMPONENT/VIDEO NPUT,
standard or component video input),
VIDEO2 (o (2), standard video input),
HDMI 1 (HDMI 1 input),
HDMI 2 (HDMI 2 input),
PC (o RGB/PC, PC input)
Labeling external input sources
These input labels are shown in the input selector.
You can label external inputs according to the
devices you have connected to the TV.
1
From the PREFERENCES menu, press  or 
to select AV Connection and then press OK.
2
Press  or  to select Input Labelling and
then press OK.
3
Press  or  to select the item you want to
label and press  or  to select --, Amplifi er,
Cable, DVD, Game, PC, Recorder, Satellite or
VCR, or press the RED button to turn on the
skip.
2013/03/19 19:43:41 2013/03/19 19:43:41