Selecting The Pc/Hdmi 1 Audio Mode; Setting The Hdmi 1 Audio Mode - Toshiba 39L4300 Series Owner's Manual

• L-PCM: Linear-Pulse Code Modulation
• Supported Audio format: L-PCM, Dolby Digital
sample rate 32/44.1/48 kHz
Connecting an HDMI device
One HDMI cable (type A connector)
For proper operation, it is recommended that you
use a short HDMI cable.
HDMI cable transfers both video and audio.
TV back view
HDMI device
VIDE O AUDIO
L
Connecting a DVI device
One HDMI (type A connector)-to-DVI adapter cable
and audio cables.
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-
DVI adapter cable should not exceed 3 m. The
recommended length is 2 m.
Standard analogue audio cables
An HDMI-to-DVI adapter cable transfers only video.
Separate analogue audio cables are required.
TV back view
DVI device
VIDEO AUDIO
L R
Using the TV's features
TV side view
R
IN
HD MI OU T
OUT
PC/HDMI 1
(AUDIO)
DVI
OUT
IN
OUT

Selecting the PC/HDMI 1 Audio mode

You can select PC audio or HDMI audio when using
this function.
1
From the PREFERENCES menu and press  or
 to select AV Connection
2
Press OK to display the AV Connection menu.
AV Connection
Input Labelling
PC/HDMI 1 Audio
HDMI 1 Audio
3
Press  or  to select PC/HDMI 1 Audio and
press  or  to select PC or HDMI1.

Setting the HDMI 1 Audio mode

You can select sound of an HDMI or DVI device
connected to the HDMI input terminals from three
modes:
Auto, Digital or Analogue.
NOTE:
This function is available only when the PC/HDMI 1
Audio mode is set to HDMI1.
1
From the AV Connection menu, press  or 
to select HDMI 1 Audio.
2
Press  or  to select Auto, Digital or
Analogue.
PC
Digital
29