Advanced Bionics Auria Quick Start Manual page 4

Step 3:
Connect the cable from the power supply to the charger.
Step 4:
Insert the power adapter that you connected to the power supply into an outlet. A
green light on the charger will light up when there is a proper connection.
Step 5:
Slide the PowerCel onto the charger. You can charge up to four PowerCels at once.
There are two indicator lights for each PowerCel slot. The orange light indicates that
the PowerCel is charging. This light will turn off when the PowerCel is fully charged.
The PowerCel recharges in 4–5 hours. A red light indicates that there may be a
problem with the PowerCel.
Assembling Your Harmony Processor
Step 1:
To attach the earhook, simply align and push into place.
4 Quick Start Guide for the Auria™ Harmony™ Processor • English
Connect Power
Adapter Here
To Charger
Step 2:
Slide a fully charged PowerCel onto the processor. This will turn on the processor.
The ORANGE LED Status Indicator should flash two or more times to verify that the
PowerCel is sufficiently charged.
Step 3:
To attach the chosen Color Cover (optional), simply align and press into place.
Step 4:
Attach the headpiece cable by sliding it into the headpiece cable connection port of
the processor.
Wearing Your Harmony Processor
Step 1:
Set the program switch to the appropriate program and turn the volume down by
moving the volume dial in a counterclockwise direction.
Quick Start Guide for the Auria™ Harmony™ Processor • English 5
LED Status Indicator
Volume Dial
Program Switch