Preparation For Smb Send; Preparation Flow - Olivetti d-COLOR MF3300 Operations

3
3.2

Preparation for SMB Send

3.2.1

Preparation flow

Preparing a destination computer
Checking the computer and user names
% Check the destination computer name and available user name.
Creating a shared folder
% Create a destination folder, and start sharing.
Connecting this machine to the network
Checking a LAN cable for connection
Checking the network settings
% Check that an IP address is assigned to this machine.
Preparing the environment required to use the SMB Send function
Enabling the SMB Send function
% You can use this function with the default settings unless otherwise requested.
Configuring the machine to suit your environment
Registering a frequently used destination
% This will save you from having to enter a destination each time you send data.
Using the WINS server
% If WINS (Windows Internet Name Service) is used to communicate with a device on the network, reg-
ister the WINS server.
Using the direct hosting SMB service
% When using the direct hosting SMB service to communicate with a device on the network, enable
the direct hosting SMB service. (You can use this function with the default settings unless otherwise
requested.)
Using LLMNR
% When using LLMNR (Link-local Multicast Name Resolution) to communicate with a device on the
network, enable LLMNR. (You can use this function with the default settings unless otherwise re-
quested.)
Using DFS
% If DFS (Distributed File System) is installed in your environment, configure its setting. (You can use
this function with the default settings unless otherwise requested.)
Preparation finished
3-4
Preparation for SMB Send
d-Color MF 3300/3800
3.2