Drive Face - Sym Joyride125 Service Manual

8. V-BELT DRIVING SYSTEM/KICK STARTER

Drive face

Driving belt
Driven pulley
Drive shaft
Install the clutch with universal holder, and then
Clutch outer
tighten nut to specified torque value.
Torque value: 5.0~6.0 kgf-m
Nut
Universal holder
DRIVE FACE
Removal
Remove left crankcase cover.
Universal holder
Hold generator flywheel with universal holder,
and then remove drive face nut.
Remove drive face.
To this chapter contents
8-6