Disassembly Of Final Driving Mechanism; Inspection Of Final Driving Mechanism - Sym Joyride125 Service Manual

9. FINAL DRIVING MECHANISM
Disassembly of Final Driving
Mechanism
Remove driven pulley.
Drain gear oil out from gear box.
Remove gear box cover bolts and then remove
the cover.
Remove gasket and dowel pin.
7 bolts
Remove drive shaft.
Remove final driving gear and shaft.
Remove countershaft and gear.
Inspection of Final Driving
Mechanism
Check if the countershaft is wear or damage.
Check if the final shaft and gear are burn, wear
or damage.
To this chapter contents
9-3