Sym Joyride125 Service Manual page 19

1. GENERAL INFORMATION
E
. CLUTCH, DRIVING AND DRIVING PULLEY
Engine can be started but
motorcycle can not be driving
Engine running and misfire as
motorcycle initial forward moving
or jumping sudden (rear wheel
rotating as engine in running)
Poor initial driving (Poor climbing
performance)
1-14
FAULT CONDITION
To this chapter contents
PROBABLE CAUSES
1. Driving belt worn out or deformation
2. Driving disk damaged
3. Driving pulley spring broken
4. Clutch lining broken
5. Driving shaft groove broken
6. Transmission gear damage
7. Transmission gear worn out or burned
1. Clutch lining spring broken
2. Clutch outer stuck with clutch balance weights
3. Connection parts in clutch and shaft worn out or
burned
1. Driving belt worn out or deformation
2. Balance weight roller worn out
3. Driving sliding gear shaft worn out
4. Driving disk spring deformation
5. Driving sliding gear shaft worn out
6. Greased in driving belt and sliding gear.