Choosing A Ringtone - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set
Contents

Choosing a ringtone

You can choose from a set of predefined ringtones. The
chosen ringtone can be played back from this page.
The ringtone will be played back on the video system
itself, and not through the web interface.
D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface Web interface
Navigate to: Configuration > Personalization
Changing ringtone
Choose a ringtone from the drop-down list,
and click Save
Playing back the ringtone
Click the play button ( ► ) to play back the ringtone.
Use the stop button (  ) to end the playback.
Set the ringtone volume
Use the slide bar to adjust the ringtone volume.
System settings
to make it the active ringtone.
29
Administrator Guide
Setting passwords
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
Appendices