Cisco TelePresence SX10 Quick Set Administrator's Manual page 97

Cisco TelePresence SX10 Quick Set
Contents
Video Input Connector [1..3] Visibility
Define the visibility of the video input connector in the menus on the user interface.
Note that Connector 1 is the system's integrated camera, which is not available as a
presentation source.
> The default value is Always for Video Input Connector 2 Visibility (the HDMI connector).
> The default value is IfSignal for Video Input Connector 3 Visibility (the VGA connector).
Requires user role: ADMIN
Value space: Connector 1: <Never> Other connectors: <Never/Always/IfSignal>
Never: When the input source is not expected to be used as a presentation source, set to
Never.
Always: When set to Always, the menu selection for the video input connector will always be
visible on the graphical user interface.
IfSignal: When set to IfSignal, the menu selection for the video input connector will only be
visible when something is connected to the video input.
Video Input Connector 2 Visibility: Always
Example:
Video Input Connector [1..3] CameraControl Mode
Define whether the camera that is connected to this video input connector can be controlled or
not.
Note that camera control is not available for Connector 2 (HDMI) and Connector 3 (VGA).
Requires user role: ADMIN
Value space: Connector 1: <Off/On> Connector 2,3: <Off>
Off: Disable camera control.
On: Enable camera control.
Video Input Connector 1 CameraControl Mode: On
Example:
Video Input Connector [1..3] CameraControl CameraId
Define the camera ID. This value is fixed and cannot be changed.
Requires user role: ADMIN
Value space: <1>
Range: This value is fixed and cannot be changed.
Video Input Connector 1 CameraControl CameraId: 1
Example:
D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings
Video Input Connector [2..3] Quality
When encoding and transmitting video there will be a trade-off between high resolution and
high frame rate. For some video sources it is more important to transmit high frame rate than
high resolution and vice versa.
Requires user role: ADMIN
Value space: <Motion/Sharpness>
Motion: Gives the highest possible frame rate. Used when there is a need for higher frame
rates, typically when a large number of participants are present or when there is a lot of
motion in the picture.
Sharpness: Gives the highest possible resolution. Used when you want the highest quality of
detailed images and graphics.
Video Input Connector 3 Quality: Sharpness
Example:
Video Input Connector [1..3] OptimalDefinition Profile
This setting will only take effect if the corresponding Video Input Connector Quality setting is
set to Motion.
The optimal definition profile reflects the lighting conditions in the video conferencing room and
the quality of the camera. The better lighting conditions and the better quality of the camera,
the higher the profile. In good lighting conditions, the video encoder will provide better quality
(higher resolution or frame rate) for a given call rate. Generally, the Normal or Medium profiles
are recommended. However, when the lighting conditions are very good, the High profile can
be set in order to increase the resolution for a given call rate. The resolution must be supported
by both the calling and called systems.
Requires user role: ADMIN
Value space: <Normal/Medium/High>
Normal: Use this profile for a normally to poorly lit environment. Resolutions will be set rather
conservative.
Medium: Requires good and stable lighting conditions and a good quality video input. For
some call rates this leads to higher resolution.
High: Requires nearly optimal video conferencing lighting conditions and a good quality video
input in order to achieve a good overall experience. Rather high resolutions will be used.
Video Input Connector 1 OptimalDefinition Profile: Medium
Example:
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
97
Administrator Guide
Setting passwords Appendices