Using Daily Timer - JVC UX-F70MD Instructions Manual

4
Select the media to be recorded on.
1) Press ¢ or 4 repeatedly to select the media.
TO MD
2) Press SET.
• When you select "TO MD," select the recording
length mode from "SP," "LP2," or "LP4" by
pressing ¢ or 4.
• When you select "TO TAPE," select the reverse
mode either or
3) Press SET again.
5
Set the timer-on and timer-off time.
1) Press ¢ or 4 repeatedly to select the hour of
the timer-on time, then press SET.
The minute digit of timer-on time starts flashing on
the display.
»
Timer-on time
2) Press ¢ or 4 repeatedly to select the minute
of the timer-on time, then press SET.
The hour digit of timer-off time starts flashing on
the display.
3) Press ¢ or 4 repeatedly to select the hour of
the timer-off time, then press SET.
The minute digit of timer-off time starts flashing on
the display.
4) Press ¢ or 4 repeatedly to select the minute
of the timer-off time, then press SET.
The REC indicator stops flashing and remains lit.
6
Press STANDBY/ON to turn off the unit (on
standby) if necessary.
The setting you have done are shown on the display in
sequence.
The REC indicator remains lit on the display.
• No sounds come out of the speaker during timer
recording is performed.
TO TAPE
by pressing ¢ or 4.
»
Timer-off time
To turn off the Recording Timer after its setting is done,
1 Press CLOCK/TIMER repeatedly until "REC TIMER"
appears on the display.
2 Press ¢ to select "OFF" in step 2 on page 57.
The timer ( ) and REC indicators go off from the
display.
To turn on the Recording Timer again, press 4 to
select "ON" in step 2 above.
The timer ( ) and REC indicators light on the display.
The settings you have done are shown on the display for
your confirmation.
Recording Timer will be canceled and the unit will
not turn off automatically in the following.
• When you press 7 (while recording.)
• When you turn off the Recording Timer (see above.)
When you unplug the AC power cord or if a power
failure occurs
The clock setting, the tuner preset stations and other settings will
be erased.

Using Daily Timer

With Daily Timer, you can wake up to your favorite music
or radio program.
• You can set Daily Timer whether the unit is turned on or
off (on standby.)
• To correct a mis-entry any time during the setting
process, press CANCEL.
How Daily Timer actually works
The unit automatically turns on, and starts playing the
specified source when the timer-on time comes. Then,
when the timer-off time comes, the unit automatically turns
off (on standby).
Daily Timer works every day, and the timer settings remain
stored in memory until you reset them or unplug the AC
power cord.
On the remote control ONLY:
1
Press CLOCK/TIMER repeatedly until "DAILY
TIMER" appears on the display.
The timer ( ) indicator lights, and the DAILY
indicator starts flashing on the display.
• Each time you press the button, the timer mode
changes as follows:
REC TIMER
Clock Time
– 58 –
Continued
DAILY TIMER
TIME ADJUST