Paper Jam In The Saddle Stitch Finisher Mj-1106 And The Hole Punch Unit Mj-6103 (Both Optional) - Toshiba e-studio206l Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
9
Close the Bridge Kit cover.
10
Close the upper receiving tray of the finisher.
Place your hands on the near and far side of the lever and push to
close the tray until it clicks.
Be careful not to let your fingers be caught between the
finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray of the finisher can also be closed by
pressing the right side of the lever.

Paper jam in the Saddle Stitch Finisher MJ-1106 and the Hole Punch Unit MJ-6103 (both optional)

1
Raise the lever and open the upper receiving tray of
the finisher.
2
Open the cover of the Hole Punch Unit when it is
installed.
1 TROUBLESHOOTING FOR THE HARDWARE
2
Clearing a Paper Jam
1
31