Misfeed In The Saddle Stitch Finisher And The Hole Punch Unit (Optional: Mj-1030, Mj-6004) - Toshiba e-STUDIO3510c Operator's Manual

Basic functions with ga-1210

Hide thumbs Also See for e-STUDIO3510c:

Table of Contents

The upper tray can be closed by

pressing the right side of the latch.

Misfeed in the Saddle Stitch Finisher and the Hole Punch Unit

(optional: MJ-1030, MJ-6004)

Hold up the guide and remove

any misfed paper in the paper

When the Hole Punch Unit (optional: MJ-

6004) is installed, proceed to step 2. If

not installed, proceed to step 6.

Open the front cover of the

Hole Punch Unit.

Turn the green knob to locate

the triangle mark within the

area indicated on the label.

Under this condition, the punchers are

E-studio3500c E-studio2500c