Error Codes - Toshiba e-studio206l Troubleshooting Manual

Multifunctional digital systems
Hide thumbs Also See for e-studio206l:
Table of Contents

Advertisement

1.TROUBLESHOOTING FOR THE HARDWARE
Message
Toner near Empty
TONER NOT RECOGNIZED
Install new toner cartridge
Please Empty Hole Punch Waste
DEPARTMENT Quota exceeded.
Contact the Administrator.
Not enough Work Space to store
originals
Will you print out stored originals?
USER Quota exceeded.
Contact the Administrator.
USER and DEPARTMENT Quota
exceeded.
Contact the Administrator.
The number of originals exceeds the
limits.
The scanned data are deleted.
The number of originals exceeds the
limits.
Will you copy stored originals?

Error Codes

The error codes indicating the status of the equipment may appear on the touch panel. You can find the listings of these
error codes in Chapter 7.
P.114 "Error Codes"
Problem Description
Toner is running out.
The toner cartridge is not installed. Or
it is not installed correctly.
A toner cartridge not recommended
by TOSHIBA is being used.
No toner is left.
The Hole Punch Unit dust bin is full.
The copying, printing or scanning
quota to the department has reached
"0".
Internal memory available ran out
while scanning.
The copying, printing or scanning
quota to the user has reached "0".
The copying, printing or scanning
quota to the user and department has
reached "0".
The number of originals to be
scanned has exceeded the limit of
1000 sheets during scanning. (The
magazine sort or page number
function is used.)
The number of originals to be
scanned has exceeded the limit of
1000 sheets during scanning.
1 TROUBLESHOOTING FOR THE HARDWARE
Corrective Action
Some toner is still left in the toner cartridge while this
message is displayed. You do not have to replace the
toner cartridge yet.
Prepare a new toner cartridge.
(About another 1000 copies, set at the time of
shipment, can be made after this message appears.)
Replace the toner cartridge after the toner has
completely run out. [Install new toner
cartridge] is displayed at that time.
If you want to replace the toner cartridge
though some toner is still left, follow the
procedure below:
P.63 "Replacing a "Near Empty" toner
cartridge"
Install the toner cartridge correctly.
P.59 "Replacing a Toner Cartridge"
Use a TOSHIBA-recommended toner cartridge.
P.59 "Replacing a Toner Cartridge"
Replace the toner cartridge.
P.59 "Replacing a Toner Cartridge"
Remove the paper punchings.
P.74 "Cleaning the Hole Punch Dust Bin"
For details of setting the quota, ask your administrator.
To print out the data for the originals stored (scanned)
until the message appeared, press [YES] on the touch
panel. To delete the stored data, press [NO].
For details of setting the quota, ask your administrator.
For details of setting the quota, ask your administrator.
Reduce the number of originals to be scanned, and
try again.
To print out the data for the originals stored (scanned)
until the message appeared, press [YES] on the touch
panel. To delete the stored data, press [NO].
Messages Displayed on the Touch Panel
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents